国家材料腐蚀与防护科学数据中心
National Materials Corrosion and Protection Scientific Data Center
| 数据类型 | 关键词 | 关键词 | 来源 | 更新时间 |
|---|---|---|---|---|
| 出版物 | Ti-4Al-2.5V-1.5Fe合金多道次热变形行为及微观组织演变 | Multi-pass hot deformation behavior and microstructure evolution of Ti-4Al-2. 5V-1. 5Fe alloy | 低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 | 2021-04-07 |
| 出版物 | 等离子球化钼粉 3D 打印工艺适配性研究 | Study on the Suitability between Technological Parameters | 低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 | 2021-03-30 |
| 出版物 | nvestigation on heat transfer performance of corrugated tubes in low-temperature multi-effect falling-film evaporation | nvestigation on heat transfer performance of corrugated tubes in low-temperature multi-effect falling-film evaporation | 低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 | 2021-03-30 |
| 出版物 | 工业纯钛热轧及冷轧板表面缺陷研究 | Research on surface defects of commercially pure titanium hot-rolled and cold-rolled plates | 低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 | 2021-03-30 |
| 出版物 | Ti-6Al-4V合金高温氧化动力学及行为 | High-temperature oxidation kinetics and behavior of Ti-6Al-4V alloy | 低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 | 2021-03-30 |
| 出版物 | 2种3D打印用雾化Ti-6Al-4V合金粉末的对比研究 | Comparative Study of Two Kinds of Atomized Ti-6Al-4V Alloy Powders for 3D Printing | 2021-03-23 | |
| 出版物 | 3D打印用钛合金粉末制备技术分析 | Simple Descriptions of Preparation Technology of Titanium Alloy Powder for 3D Printing | 2021-03-23 | |
| 出版物 | Ti-28%Ta合金的拉伸性能 | Effect of annealing temperature on microstructure and mechanical properties of TC4 titanium alloy formed by selective laser melting | 2021-03-23 | |
| 出版物 | VIGA-CC法制备球形Ti-35.8Al-18.4Nb合金粉末及其性能研究 | Preparation and properties of spherical Ti‒35.8Al‒18.4Nb alloy powders by VIGA-CC method | 2021-03-23 | |
| 出版物 | 退火温度对激光选区熔化成形 TC4 钛合金组织及力学性能的影响 | Effect of annealing temperature on microstructure and mechanical properties of TC4 titanium alloy formed by selective laser melting | 2021-03-23 |