| 出版物 |
等离子球化钼粉 3D 打印工艺适配性研究 |
Study on the Suitability between Technological Parameters |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-03-30 |
| 出版物 |
nvestigation on heat transfer performance of corrugated tubes in low-temperature multi-effect falling-film evaporation |
nvestigation on heat transfer performance of corrugated tubes in low-temperature multi-effect falling-film evaporation |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-03-30 |
| 出版物 |
工业纯钛热轧及冷轧板表面缺陷研究 |
Research on surface defects of commercially pure titanium hot-rolled and cold-rolled plates |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-03-30 |
| 出版物 |
Ti-6Al-4V合金高温氧化动力学及行为 |
High-temperature oxidation kinetics and behavior of Ti-6Al-4V alloy |
低成本高耐蚀钛及钛合金管材与高品质钛带制造技术开发及应用 |
2021-03-30 |
| 出版物 |
2种3D打印用雾化Ti-6Al-4V合金粉末的对比研究 |
Comparative Study of Two Kinds of Atomized Ti-6Al-4V Alloy Powders for 3D Printing |
|
2021-03-23 |
| 出版物 |
3D打印用钛合金粉末制备技术分析 |
Simple Descriptions of Preparation Technology of Titanium Alloy Powder for 3D Printing |
|
2021-03-23 |
| 出版物 |
Ti-28%Ta合金的拉伸性能 |
Effect of annealing temperature on microstructure and mechanical properties of TC4 titanium alloy formed by selective laser melting |
|
2021-03-23 |
| 出版物 |
VIGA-CC法制备球形Ti-35.8Al-18.4Nb合金粉末及其性能研究 |
Preparation and properties of spherical Ti‒35.8Al‒18.4Nb alloy powders by VIGA-CC method |
|
2021-03-23 |
| 出版物 |
退火温度对激光选区熔化成形 TC4 钛合金组织及力学性能的影响 |
Effect of annealing temperature on microstructure and mechanical properties of TC4 titanium alloy formed by selective laser melting |
|
2021-03-23 |
| 出版物 |
非接触式测试技术在气雾化制粉研究中的应用 |
Application of Non-Contact Measurement Techniques in Gas Atomization Powder Preparation Ｒesearch |
|
2021-03-23 |
